The main updates implemented in this new release are:
-
Current compliances read from the global variable (only for Hv source,
because there's no compliance defined in the Vsource driver).
-
integration of the new option "off-line", which has needed many changes,
like:
-
check_param.vi
-
for each test, we have 2 options: measurement (VIs from Christophe)
or plot_measurement (the ones from Jean-Laurent).
-
LCR integration time set for each C measurement.
-
new folders to order the VIs in a more logical way: acquisition, plotters,
analysis, off_line.
-
new local file called cmts_xxx.txt which contains the operator name
and the comments of each measurement.
-
each time the humidity is measured (at the beginning and the end of
the automatic run and at the end of each manual test, there is a check
the value is lower than 40%. If not, a dialog box inform you (the program
is not stopped).
-
old problem fixed: due to the contacts inversion in the probecard for
the gcd, we had a wrong switching scheme (in fact, we had to close the
mos contact on the p+ and the p+ contact on the mos in the old release).
-
length of the sensor_ID tested in check param to be 14.
- when the box
"measurement done" is ticked at the end of each measurement, the comment
is updated (if needed).
-
reading of the stray C for C_int from the local file with 3 digits
-
absolute value remove in iv_gcd.
maintained by Jean-Charles Fontaine